Engine / Reverse differential gear -
5
1.
Each Piston rings nicked need to detach the 120 degrees.
2. Piston ring nicked and the piston pin hole can not be a straight line.
3. Piston ring nicked are installed are toward the top of the piston.
4. Notch between the rings can not overlap and must be spaced
。
Upper-left 1.3 nicked, upper-right section 2.4 nicked
.
Cylinder installation steps:
Installed in accordance with the removal procedure in reverse.
Installation Notes:
1.Before installation cylinder surfaces, piston rings painted oil.
2.piston rings can not be broken or damaged.
3. not to allow the piston pin clip or foreign objects falling in the crankcase ,Cloth can be used to cover the crankcase.
4.Installed before connecting the cylinder piston
coke to clear a clean, Re-assembled.
5.The top of the piston "IN" mark on the top of the intake valve side to install.
Use cloth cover crankcase
94
