Shock absorber / brake system/wheel - 6
6.6 Front wheels - brake pad (disc)
6.6.1 Rear
brake pads
1.Remove the screw (19/23), take out the rear brake
calipers and brake hose clamp .
2. Using needle-nose pliers to remove the R type
retaining ring.
3.using needle nose pliers remove the Spring pin.
4.Remove the yoke spring and brake pad.
>Disassembly -
Step
1. Remove the screws of the brake calipers * 2.
2. will push the piston back.
3. Remove the screw.
4 Remove the yoke springs and brake pads.
>Measurement -
brake pad-
Standard values:5.0mm
Available limits:4.3mm
Lower than the limit - Replacement
Installation -
Brake pad can be installed in accordance with
demolition reverse.
Measurement -
brake pad-
Standard values:5.0mm
Available limits:4.3mm
Lower than the limit - Replacement
Step1
Step2
Step4
Step3
126
