Shock absorber / brake system/wheel - 6
6.3 The front fork assembly installation
This side of Upward
This side of Upward
This side of Downward
This side of Downward
Installation –
1.Ball bearing gage (up / down) for
Smear
the butter.
Note: Ball bearing gage direction, the installation can no be wrong .
.
2. front fork assembly installation-
Front damper can be installed in accordance with demolition
reverse (See the
chapter 6.2).
Step:
一
.The hand will upper ring-shape nut locking
，
Using fork
disassembly tool to the Leftward and then tighten about 1/4 to
1/2 turn.
二
. The hand will upper ring-shape nut locking, using fork
disassembly tool fixed steering shaft lock nut and upper
ring-shape nut.
三
. Will be upper ring-shape nut locking rightward.
四
.Check the front fork can not be too loose or too tight.
3. Install the front fender and front wheels.
4. Installation on the handle bar.
124
