Engine / Reverse differential gear -
5
5-3.3 Lubrication System
Assembly:
1.
Install the inner and outer of the oil pump.
2.
Install the oil pump shaft.
3.
Install the lock pin.
4.
Match the lock pin hole to the pump cover and install the oil
pump cover.
5.Put on the screws and tighten them.
6.After installing, turn the shaft lightly to assure installation.
7.Place the oil pump into the carnkcase.
Note:
The notch of the oil pump shaft should comply
With the notch of the inner gear.
Note:
When installing, the arrow on the oil pump
body should be pointed upwards. Then fill in
the recommended oil before the installation.
Lubrication System Diagram
107
