Installation or Removal of External Components- 2
Single decomposition: Rear lamp (9) and the license plate (1) Combination
＊
dismantle-
1. Remove the self-tapping screws (10), separation rear lamp (9).
2. Remove the self-tapping screws (6/8), separating left / right signal lamp(5/7).
3. Remove the nut / washer (3/4), separated Reflectors(2).
＊
install-
According to the reverse procedure as above.
Single decomposition: Reflector holder
＊
dismantle-
1.Remove the screws/washer(5/6/7)
，
take out the
Reflector holder.
2.
Remove the screws(4)
，
take out the reflector DOT(2).
＊
install-
According to the reverse procedure as above.
26
