Check & Adjust -3
3-12
Throttle cable free clearance check / adjustment
1.Check -
> Check the idle speed is too high.
> Rotate up and down the right grip, check the throttle cable
clearance.
Whether large or small, please adjust exceeded the standard
value.
2.
Measurement - the throttle cable free play
Standard value: 2 ~ 6mm
3.
Adjustments - throttle cable free play
a: Loosen fixing nut
b: clockwise or counter-clockwise adjustment screw
Until Within the standard range.
clockwise (1) = Tighten
Counterclockwise (2) = loosen
C: Tighten the fixing nut
NOTE
The throttle the ropes free gap adjustment, the handle tube
to the left, Then turn right in the end, check the fuel wires
would interfere Lead to engine speed becomes higher.
3-13 Brakes-thin check
›
Standard values:
The front brakes -thin: 5.0mm
After brakes -thin:5.0mm
›
Use limits
:
front
:4.3mm(
Less than 0.7mm replacement)
After
: 4.0mm(
Less than 1.0mm replacement)
2. Measurement -
> Brakes-thin to the film thickness
Out of range
→
Replacement (trench polished)
NOTE
1.The brake pads to reach the usage limit replace the whole
group.
2.Brake pad attached to the surface of the oil, will reduce
braking
performance
,
severe cases
may
endanger life
.
front brakes -thin
After brakes -thin
4.0mm
55
