Installation or Removal of External Components- 2
Brake master cylinder / Haft switch assy disassembly
＊
dismantle Step-
1.The brake fluid extraction was complete, remove the joint bolt (11) and copper gasket(10), remove the brake
master cylinder (6/8) screws and take out the brake master cylinder(6/8)- Figure ( 1.2).
2.Remove the bolts (4) and right haft switch fixing screws (7),take out the grip(9)
、
haft switch(2) and front right
signallamp (6)- Figure 1.
3.Remove left haft switch fixing screws (4),take out the haft switch(2) and front left signallamp (3)- Figure 2.
4. Installation, the brake master cylinder aligned with mark on the handle bar (shown right).
31
