Engine / Reverse differential gear -
5
1.Checking driving belt
(1)check driving belt is cracked or notrubber and fiber is
loosened or not also check if they are extraordinary
worn out.
(2)driving belt width:
limit of use:change it below 19mm
2.Disassemble slide driving plate set.
(1)Remove bush of slide driving plate.
(2)Remove screw, and disassemble the cover of slide driving
Plate.
(3)Remove ramp plate.
(4)Remove weight roller.
3.Checlomg
(1)Check the wearing condition of weight roller.
limit of use : change it
below17.4mm
(2)Check gasket inner dia ofslide driving plate:
limit of use : change it over 24.1mm.
(3)Check the driving pulley:
surface wearing condition.
(4)Check the outer diameter of the contact surface of the :
movable driving plate.
limit of use : change it
below 23.94mm.
102
