Engine / Reverse differential gear -
5
4.Checking clutch:
dismantling tool
a.Check clutch driving face.
Check clutch cover about its wearing condition
And inner diameter measurement.
limit of use: change it above 125.5mm
b.Check clutch lining wearing condition and
measure the lining thickness.
limit of use : change it below 1.5mm.
c.Check driving spring free length.
Standard: 151mm
limit of usage:
Change it below 127 mm
d. Check wearing condition of
driving plate sets. And measure outer diameter.
limit of use: change it above 33.95mm.
e.Check wearing condition of slide driven plate and
measure its Inner diameter.
limit of use : change it above 34.00mm.
f.Check is there any wearing occur to the ditch
g.Check wearing condition of oil seal, if necessary,
change a new one.
NOTE:
1.
General version of the CVT system, follow the standard normal maintenance operations.
2. Cargo version of the CVT system, each regular maintenance, the implementation of simple checks (short road test)
, check the clutch without severe wobble or abnormal sound? Roller without serious wear? V-belt is aging cracking?
3. In mind when installing drive belt, drive face, clutch outer, can not have grease adhesions.
103
