AutoVu SharpX mobile installation
tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016
12
• A cable rack is included with the mounting bracket. Installing the cable rack and securing cables
with tie wraps will help to protect the cable connections from damage.
• Attach the bracket to the vehicle using screws that are at least a #10 pan head. The screws must
be long enough to secure the hardware, but short enough not to damage any vehicle components
under the mounting location.
• Attach the wire rack and mounting brackets to the LPR Processing Unit using the supplied flat
washers, Belleville washers, and hexagonal head cap screws as shown in the documentation that
is included with the mounting bracket.
Hardware orientation:
• If the LPR Processing Unit includes the Navigation option, do not mount the hardware with the
face plate pointing up or down.
• Do not mount the LPR Processing Unit upside-down as this will affect heat dissipation.
Horizontal mount:
• If you are mounting the LPR Processing Unit under a seat, remove the seat to gain access to the
mounting location.
• If you are mounting the LPR Processing Unit under a seat, mounting the unit with the cable
connections pointing to the side will help to protect the connections.
Horizontal mount (flanges in):
• The standard horizontal mounting brackets can be installed with the mounting flanges pointing
outward. This is the easier method, but depending upon your installation needs, the flanges can
also be tucked under the LPR Processing Unit. If you are installing the bracket this way, keep in
mind that you will need to install the brackets first. This is because the mounting holes will not be
accessible if the LPR Processing Unit is connected to the bracket.
• To install the LPR Processing Unit with the flanges pointing in, you will need a template
so that you can accurately mark the mounting holes. Create a template with the following
measurements:
