AutoVu SharpX mobile installation
tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016
29
Camera connections for the X1S LPR Processing Unit
The recommended camera port assignments depend on the model of LPR Processing Unit and
SharpX cameras being used.
On the X1S LPR Processing Unit, each hardware path is shared by two camera ports. This does not
affect VGA SharpX cameras, but it causes a limitation when connecting XGA SharpX cameras. In order
for XGA cameras to achieve a frame rate of 30 fps, they cannot share a hardware path with any other
cameras.
Example
If you are using one XGA cameras and one VGA camera on an X1S LPR Processing unit, connect one
camera to each hardware path to balance the load and maintain a higher frame rate for the XGA
camera (30 fps).
X1S LPR Processing Unit
SBC
Hardware
path 1
Hardware
path 2
Camera
port 1
Camera
port 2
Camera
port 3
Camera
port 4
XGA
VGA
Example
If an XGA camera shares a hardware path with another camera, it will result in a frame rate drop to 10
fps for the XGA camera.
X1S LPR Processing Unit
SBC
Hardware
path 1
Hardware
path 2
Camera
port 1
Camera
port 2
Camera
port 3
Camera
port 4
XGA
VGA
