AutoVu SharpX mobile installation
tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation
EN.410.018-XS(6) | Last updated: October 6, 2016
71
Sealing the camera cable holes
To ensure a watertight installation, you must seal all camera cable holes drilled in the body of the
vehicle. Because one of the camera cable holes will also be used for running the cable for the satellite
navigation hardware, you must wait until all hardware is installed before you seal the holes.
Before you begin
• Install the cameras on the vehicle and test their operation.
• Install the satellite navigation hardware and pass the cable through the hole drilled for the
camera cable.
To seal the camera cable holes:
1 Clean the area around the camera cable hole using isopropyl alcohol or rubbing alcohol.
2 When the area is dry, use about a 8 cm (3 in.) section of butyl tape to wrap the cable and the area
around the base of the cable gland.
3 Press the butyl tape into place to ensure a tight seal.
Example
Watch this video to learn more. Click the
Captions
icon (
CC
) to turn on video captions in one of the
available languages.
