Genetec AutoVu SharpX Mobile Hardware Manual Download Page 107

Page: 107 / 109

tip.genetec.com | AutoVu Hardware Guide for SharpX Mobile Installation

EN.410.018-XS(6) | Last updated: October 6, 2016

101

Technical support

Genetec

™

Technical Assistance Center (GTAC) is committed to providing its worldwide clientele

with the best technical support services available. As a Genetec

™

customer, you have access to the

Genetec

™

Technical Information Site, where you can find information and search for answers to your

product questions.
•

Genetec

™

Technical Information Site:

Find articles, manuals, and videos that answer your

questions or help you solve technical issues.
Before contacting GTAC or opening a support case, it is recommended to search the Technical

Information Site for potential fixes, workarounds, or known issues.
To access the Technical Information Site, log on to

. Can't find what you're looking for? Contact

[email protected]

•

Genetec

™

Technical Assistance Center (GTAC):

Contacting GTAC is described in the Genetec

™

Lifecycle Management (GLM) documents:

EN_GLM_ASSURANCE

and

EN_GLM_ADVANTAGE

Additional resources

If you require additional resources other than the Genetec

™

Technical Assistance Center, the

following is available to you:
•

Forum:

The Forum is an easy-to-use message board that allows clients and Genetec

™

staff to

communicate with each other and discuss a variety of topics, ranging from technical questions to

technology tips. You can log in or sign up at

https://gtapforum.genetec.com

•

Technical training:

In a professional classroom environment or from the convenience of your

own office, our qualified trainers can guide you through system design, installation, operation,

and troubleshooting. Technical training services are offered for all products and for customers

with a varied level of technical experience, and can be customized to meet your specific needs

and objectives. For more information, go to

http://www.genetec.com/support/training/training-

calendar

Licensing

• For license activations or resets, please contact GTAC at

https://gtap.genetec.com

• For issues with license content or part numbers, or concerns about an order, please contact

Genetec

™

Customer Service at

[email protected]

, or call 1-866-684-8006 (option #3).

• If you require a demo license or have questions regarding pricing, please contact Genetec

™

Sales

[email protected]

, or call 1-866-684-8006 (option #2).

Hardware product issues and defects

Please contact GTAC at

https://gtap.genetec.com

to address any issue regarding Genetec

™

appliances or any hardware purchased through Genetec Inc.

Summary of Contents for AutoVu SharpX Mobile














































































































Search results

Summary of Contents for AutoVu SharpX Mobile

Reviews:

Related manuals for AutoVu SharpX Mobile

Brands by name

Popular brands

Genetec AutoVu SharpX Mobile, Hardware Manual

Search results

Summary of Contents for AutoVu SharpX Mobile

Reviews:

Related manuals for AutoVu SharpX Mobile

Brands by name

Popular brands