owners
manual
wk2000 se
Page13
Basic concepts
Modes, pages and values are selected as follows: After selecting a function
with the corresponding arrowhead, it is possible:
DATA ENTRY
For example
:
to assign a different Sound to a track, fi rst select the track with the corresponding function key (F1/F9). The selected track
starts blinking in the display track area, indicating that it is ready to accept modifi cations (in this case,
the PERF function must not be
selected and the SINGLE TOUCH PLAY function must be off
).
• To change Page (where two or more pages are given) using the PAGE
keys.
•
To Enter data (change parameter values) using the DIAL.
Some panel buttons, when held down for about 2 seconds, give direct access to the edit panel of the selected function.
These keys are: STORE PERFORMANCE, STYLE/TEMPO LOCK, ARRANGE ON/OFF, HARMONY, REV/CHO, RECORD
(Sequencer mode).
When you need to enter the name of a Performance, of a Song Style, or during SAVE operations in Disk mode, WK2000
SE keyboard operates like an alphanumeric input peripheral. Each keyboard note corresponds to a letter, number or a
symbol. Up to 7 character names can be entered through the keyboard keys. (up to 8 characters when in FLOPPY DISK
mode). The table below illustrates the position of the characters on the keyboard.
ENTERING ALPHANUMERIC DATA
The
ENTER
command confi rms an operation and the values assigned to the
modifi ed parameter. In some function pages, Enter confi rms a value and
executes an operation (e.g.: Load operation in Disk mode). Moreover, Enter
can also provide access to Disk and Midi modes.
ENTER/ESCAPE
ESCAPE
cancels an operation or the values assigned to the parameters.
•D2
CAPS
- Toggles between Caps On / Caps Off (Capital and small letters).
•D#2
INS/OVER
- Insert/Overwrite. Insert adds a character between two others, Overwrite, replaces existing
characters.
•
E2
SPACE
- a space is added
•
F2
DELETE
- deletes the selection or the successive characters
•
G2
<. (BACKSPACE)
- deletes previous characters. Move to the right or to the left using the + and - buttons of the
numeric keypad respectively
The left most notes are control keys:
Overwrite is the default setting of the keyboard
Press ESCAPE to exit. Press and hold the STORE PERF key to record the new Performance name. Press ENTER to confi rm.
