manualshive.com logo in svg

Gefen EXT-UHD600A-88, User Manual

Share
Download
Gefen EXT-UHD600A-88 User Manual Download Page 71

page | 59

B

asic Oper

ation

B

asic Oper

ation

Menu System

7.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote 

control to change the current setting.  The cursor will appear next to the current 

setting. 

 

 

 

 

8.  Press and release the 

▲

 or 

▼

 buttons on the front panel or on the IR remote control, 

to select the desired setting.

 

►

Enabled

 

RS-232 commands are executed and a response is sent back to the automation 

device.

 

►

Disabled

 

RS-232 commands are executed but no response is provided. 

 

 

 

 

 

9.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote control 

to save the change. 

 

 

 

 

 

10.  Reboot the matrix to affect changes. 

 

rs-232 feedback: 

)Enabled

rs-232 feedback: 

)Disabled

rs-232 feedback: 

disabled

Summary of Contents for EXT-UHD600A-88









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands