manualshive.com logo in svg

Gefen EXT-UHD600A-88, User Manual

Share
Download
Gefen EXT-UHD600A-88 User Manual Download Page 100

page | 88

 

►

Using a Custom EDID 

 

The 

Custom - User-defined

 setting is used to store a custom EDID in the 

selected input.  To use a custom EDID, follow the instructions below:

1.  Select 

Custom - User-defined

 from the drop-down list of the desired input. 

 

 

 

 

 

2.  Copy or upload an EDID to the input that is using the 

Custom

 mode. 

See one of the following sections for more information on copying or 

uploading EDID data:

 

►

Copying EDID Data (page 89)

.

 

►

Uploading and Downloading EDID Data (page 92)

. 

3.  Set the EDID Lock mode to either 

Locked

 or 

Unlocked

:

 

►

Locked 

Prevents the EDID from being changed on the input..

 

►

Unlocked

 

Allows the EDID to be changed. 

 

 

 

 

 

 

 

 

 

4.  The name of the custom EDID will appear under the 

EDID Name

 column.

B

asic Oper

ation

The Web Interface

B

asic Oper

ation

Summary of Contents for EXT-UHD600A-88









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands