manualshive.com logo in svg

Gefen EXT-UHD600A-88, User Manual

Share
Download
Gefen EXT-UHD600A-88 User Manual Download Page 193

page | 181

A

dv

anc

ed Oper

ation

Commands

#set_io_name

Sets the name of the specified input.

Syntax

#set_io_name inout name

Parameters

inout

 

Type:  

INTEGER 

or

 CHARACTER

 

 

 

This parameter can accept either the number of an HDMI input (1 - 8) 

 

or the identifier or an HDMI output (A - H).  Only one input or output 

 

can be specified at one time.

name

 

Type:  

STRING

 

 

 

The desired name of the specified input / output.  The length of the string 

 

cannot exceed 30 characters.  Strings greater than 30 characters in length 

 

will be rejected.

Example

#set_io_name 1 Bluray

IO_NAME 1 Bluray

 

#set_io_name d BIG_screen

IO_NAME D BIG_screen

Related Commands

#get_io_name

Summary of Contents for EXT-UHD600A-88









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands