Gefen EXT-UHD600A-88, User Manual

Page: 112 / 232

page | 100
B
asic Oper
ation
The Web Interface
► Discovery Protocol Settings
• Enable Discovery : Click the Enable button to enable “discovery” mode.
Otherwise, click the Disabled button. In order for Gefen Syner-G to
discover the matrix on a network, this feature must be enabled .
• Find Your Device : Click the Show Me button to physically locate the matrix
on a network. In order for the Show Me button to be available, the Enable
Discovery button must be set to Enable . When the Show Me button is clicked,
the button text will change to Hide Me and the buttons, on the front panel,
will flash on the front panel of the matrix:
• Discovery Read Only : When set to Read Only , the IP settings for the
matrix will be displayed by Syner-G but they cannot be changed. In order
to display and change IP settings from within Gefen Syner-G, click the
Read / Write button.
• Product Description : EXT-UHD600A-88 is the default product description.
This name will be used to identify the matrix when using the Gefen Syner-G
software.
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C
Out D
Out E
Out F
Out G
Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
out a :output a
A/V In:input 01
B
asic Oper
ation