manualshive.com logo in svg

Gefen EXT-UHD600A-88, User Manual

Share
Download
Gefen EXT-UHD600A-88 User Manual Download Page 66

page | 54

B

asic Oper

ation

B

asic Oper

ation

Menu System

 

►

Enabling / Disabling Remote UDP Access

a.  From the 

UDP Access

 screen, press and release the 

▲

 or 

▼

 buttons on the 

front panel or on the IR remote control, to select the 

Remote UDP 

Access 

option.  The current setting will be displayed. 

 

 

 

 

b.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote 

control to change the current setting.  The cursor will appear next to the current 

setting. 

 

 

 

 

c.  Press and release the 

▲

 or 

▼

 buttons on the front panel or on the IR remote 

control, to select the desired setting.

 

►

Enabled

 

Allows the Remote UDP protocol to be used with the matrix.

 

►

Disabled

 

Prevents the Remote UDP protocol from being used with the matrix. 

 

 

 

 

 

d.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote 

control to save the change. 

 

 

 

 

e.  Reboot the matrix to affect changes. 

 

remote UDP access: 

disabled

remote udp access: 

>

disabled

remote udp access: 

>

enabled

remote udp access: 

enabled

B

asic Oper

ation

B

asic Oper

ation

Summary of Contents for EXT-UHD600A-88









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands