manualshive.com logo in svg

Gefen EXT-UHD600A-88, User Manual

Share
Download
Gefen EXT-UHD600A-88 User Manual Download Page 63

page | 51

B

asic Oper

ation

B

asic Oper

ation

Menu System

 

►

Enabling / Disabling Telnet Welcome Message

a.  From the 

TCP access

 screen, press and release the 

▲

 or 

▼

 buttons on the 

front panel or on the IR remote control, to select the 

Telnet Welcome 

option.  

The current setting will be displayed.  The default setting is 

show

. 

 

 

 

 

b.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote 

control to change the current setting.  The cursor will appear next to the current 

setting. 

 

 

 

 

c.  Press and release the 

▲

 or 

▼

 buttons on the front panel or on the IR remote 

control, to select the desired setting.

 

►

Show

 

Shows the welcome message at the beginning of each Telnet session.

 

►

Hide

 

Hides the welcome message for Telnet sessions. 

 

 

 

 

 

d.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote 

control to save the change. 

 

 

 

 

e.  Reboot the matrix to affect changes. 

 

TELNET WELCOME: 

SHOW

TELNET WELCOME 

>

SHOW

TELNET WELCOME 

>

HIDE

TELNET WELCOME 

HIDE

Summary of Contents for EXT-UHD600A-88









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands