Gefen EXT-UHD600A-88, User Manual

Page: 29 / 232

page | 17
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C Out D Out E Out F Out G Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
1. Go to the routing screen . If the routing screen is not displayed, then press the
Back button on the front panel or on the IR remote control until the routing screen
is displayed.
B
asic Oper
ation
B
asic Oper
ation
In the example below, the source that is connected to In
1 is currently routed to the display (sink device) that is
connected to Out A .
2. Press and release the ▲ or ▼ buttons on the front
panel or on the IR remote control to view each
output and which input is being received.
The ▲ or ▼ buttons, on the front panel, will
momentarily glow blue when pressed, as shown
below:
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
out A :output A
A/V In:input 01
Out A
In 1
from source device
to display (sink) device
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C Out D Out E Out F Out G Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
out a :output a
A/V In:input 01
Viewing the Routing Status
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C Out D Out E Out F Out G Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
out a :output a
A/V In:input 01