manualshive.com logo in svg

Gefen EXT-UHD600A-88, User Manual

Share
Download
Gefen EXT-UHD600A-88 User Manual Download Page 61

page | 49

B

asic Oper

ation

B

asic Oper

ation

Menu System

 

►

Enabling / Disabling TCP (Telnet) Access

a.  From the 

TCP access

 screen, press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote control.   

 

 

 

 

b.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote 

control to change the current setting.  An arrow cursor will be displayed next to 

the current setting, indicating that it can be changed: 

 

 

 

 

c.  Press and release the 

▲

 or 

▼

 buttons on the front panel or on the IR remote 

control, to select the desired setting.

 

►

Enabled

 

Allows Telnet sessions to the matrix.

 

►

Disabled

 

Disables Telnet sessions to the matrix. 

 

 

 

 

 

d.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote 

control to save the change. 

 

 

 

 

e.  Reboot the matrix to affect changes. 

 

tcp access: 

enabled

tcp access: 

>

enabled

tcp access: 

>

disabled

tcp access: 

disabled

Summary of Contents for EXT-UHD600A-88









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands