Gefen EXT-UHD600A-88, User Manual

Page: 41 / 232

page | 29
Routing presets can be recalled using the front panel buttons or the IR remote control.
For information on creating presets, see Routing Presets (page 29) .
Using the Front Panel
1. Start from any screen.
2. Press the Preset button on the front panel. The Preset button, on the front panel,
will flash blue when pressed.
3. The Preset selection screen will be displayed.
4. Select the desired preset by pressing and releasing the ▲ or ▼ buttons on the front
panel.
5. Once the desired preset is selected, press the Enter button on the front panel to load
the preset.
6. The preset is now loaded and the routing state, stored in the preset, will be
applied to the matrix.
7. After a few moments, the routing screen will be displayed.
B
asic Oper
ation
B
asic Oper
ation
preset: 1
name: preset
_
01
preset: 3
name: preset
_
03
preset 3: preset
_
03
set
out D :output D
A/V In:input 02
Routing Presets
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C Out D Out E Out F Out G Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
preset: 1
name: preset _ 01