Gefen EXT-UHD600A-88, User Manual

Page: 45 / 232

page | 33
B
asic Oper
ation
B
asic Oper
ation
Menu System
Audio Output Mode
This menu option allows the audio output to be set to either variable or fixed. If set to
fixed , then the matrix will control the audio output. If set to var (variable), then the output
volume will be controlled by the source.
1. Go to the routing screen . If the routing screen is not displayed, then press
the Back button on the front panel or on the IR remote control until the routing screen
is displayed.
2. Press and release the Menu button on the front panel or on the IR remote control.
The Menu button, on the front panel, will momentarily flash blue when it is pressed.
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
®
Back
Enter
IR Power
Menu Preset
Lock
4K 60 Hz 4:4:4, HDMI 2.0, HDCP 2.2
Reset
Ultra HD 600 MHz 8x8 Matrix w/HDR and Audio De-Embedder
RS-232
IP Control IR In/Ext
EXT-UHD600A-88
Out A
L/R L/R L/R L/R L/R L/R L/R L/R
In 1
Out B Out C
Out D
Out E
Out F
Out G
Out H
In 2 In 3 In 4 In 5 In 6 In 7 In 8 24V DC
SETUP
3. The Setup menu will be displayed:
4. Press the Enter button on the front panel.
If using the included IR remote control, press the
OK button.
5. The Audio Output Mode option will be displayed:
6. Press and release the ▲ or ▼ buttons on the
front panel or on the included IR remote control, to
select the desired output.
setup
AUDIO OUTPUT MODE
OUTPUT A NAME: VAR
out A :output A
A/V In:input 01