Gefen EXT-UHD600A-88, User Manual

Page: 50 / 232

page | 38
B
asic Oper
ation
B
asic Oper
ation
Menu System
7. Press the Enter button on the front panel or on the IR remote control to display the
input control screen.
8. Press and release the ▲ or ▼ buttons on the front panel or on the included IR
remote control, to select the desired input or output. These buttons will glow blue
when they are pressed on the front panel.
9. Press the Enter button on the front panel. If using the included IR remote control,
press the OK button.
If an input (1 - 8) is selected, then the following options will be available:
► 2.2 and below
Only HDCP version 2.2 and below is allowed to be sent from the source device.
► 1.4 and below
Only HDCP version 1.4 and below is allowed to be sent from the source device.
► Reject
Blocks HDCP content from being sent from the source device.
If an output (A - H) is selected, then the following options will be available:
► Follow Input
HDCP pass-through: The content on the output of the matrix matches the
content provided by the source device.
► Always Encode
Always applies HDCP encryption to the content on the output of the matrix.
So, even if the source is not HDCP, the output will be HDCP.
10. Once the desired input or output is selected, press the Enter button on the front
panel or the OK button on the IR remote control. The arrow cursor will appear next
to the current selection for the input (or output).
hdcp control: input
input 03: 2.2
input 03
>
2.2 and below
hdcp control: input
input 01: 2.2
B
asic Oper
ation
B
asic Oper
ation