manualshive.com logo in svg

Gefen EXT-UHD600A-88, User Manual

Share
Download
Gefen EXT-UHD600A-88 User Manual Download Page 46

page | 34

7.  Once the desired output is selected, press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote control.  The arrow cursor will appear next to the current 

selection for the output. 

 

 

 

 

 

8.  Press and release the 

▲

 or 

▼

 buttons on the front panel or on the IR remote control, 

to select the desired setting. 

 

 

 

 

 

9.  Press the 

Enter

 button on the front panel or the 

OK

 button on the IR remote control 

to save the setting.

10.  To set the volume control on a different output, press the 

Back

 button on the front 

panel or on the IR remote control, then repeat steps 6 - 8.

11.  To return to the routing screen, press the 

Back

 button twice.

B

asic Oper

ation

B

asic Oper

ation

Menu System

AUDIO OUTPUT MODE 

>

OUTPUT C NAME: VAR

AUDIO OUTPUT MODE 

>

OUTPUT C NAME: FIXED

B

asic Oper

ation

B

asic Oper

ation

Summary of Contents for EXT-UHD600A-88









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands