49-85248
15
The electrode of the electronic ignition system
is positioned at the rear of the burner base.
When cleaning the rangetop, be careful not
to snag the igniter with your cleaning cloth.
Damage to the igniter could occur.
Be careful not to push in a control knob while
cleaning. It could cause the igniter to spark.
Make sure that the white ceramic igniters on
the rangetop are dry and clean. Clean the
metal portion of the electrode with a soft cloth
or emery board.
Do not attempt to remove the electrode
from the rangetop.
Care and Cleaning
Professional Rangetops
Spark
igniter and
electrodes
Clean this metal part
with an emery board.
Do not clean this white
ceramic part with an
emery board.
Burner
grates
The enameled cast-iron burner grates should
be cleaned regularly.
The grates can be cleaned in the dishwasher.
The frames may be cleaned by hand or in the
dishwasher.
Wash them in hot soapy water, rinse, and dry
thoroughly.
Although they are durable, the grates will
gradually lose their shine, regardless of the
best care you can give them. This is due to
their continual exposure to high temperatures.
Do not operate a burner for an extended
period of time without cookware on the grate.
The finish on the grate may chip without
cookware to absorb the heat.
For stability, the frames have rubber pads
on each corner. During cleaning and use, be
careful not to damage or snag rubber pads.
Grates
Frame
Pads
