Maintenance
Clean the product
2018-9015-003
03-2015
10.23
Clean the product
After each use and once a year
Warning!
Beware of potential falls: always walk on the nonslip band installed on
the product.
Attention!
Use tap water to clean this product. Do not exceed 105 bar when using
a pressure washer and keep the nozzle at a distance of 30 cm from the
surface to be cleaned.
● Make sure all drains and cleaning openings are closed.
● Fill 1/3 of the spreader tank with water.
● Move the tractor back and forth to stir the water inside the tank.
● Move it to a spreading area and spread the wasted water to clean the
discharge pipe and hoses.
● When empty, open the drains and cleaning openings. Keep them open to
allow ventilation.
● Pressure wash the entire product
and equipment:
- inside the tank
- the float
- the door flaps
- sides.
● Remove the directional valve cover
to clean the housing. Clean any
accumulation.
