Assembly
Self-loading assembly (optional)
2018-9015-003
03-2015
Step 2: Primer pump installation
10
11
● Using provided hardware, bolt the primer pump (10) on the supports (11).
Tighten bolts.
● Connect the hose H1 to the valve H1 and secure it with the collar provided.
Step 3: Hose support installation
13
15
14
17
13
16
● Install the supports (13) on the welded brackets (14) using two bolts (15) for
each support.
● Install the aluminum pipe (16) on the supports (13). Install the suction pipe
on the supports located on the other side of the spreader.
● Install the half collars (17) over the pipe supports to maintain the pipes
during transport. Use two nylon spacers and two bolts to tighten the collars.
Hold the pipes firmly without compressing them.