Safety
Owner's obligation of care
2018-9015-003
03-2015
2
Safety
2.1
Owner's obligation of care
This product is designed and constructed while taking into account a potential
risk analysis, a selection of harmonized standards and other technical
specifications to be complied with in order to guarantee a maximum level of
safety.
This product is designed for agricultural purposes only and is not intended for
use on public roads.
Safety is achieved when the safety instructions are followed. It is part of the
owner's obligation of care to implement these safety measures and make sure
they are carried out at all times.
In particular, the owner must make sure that:
● everyone working with or performing activities in connection with this
product, including himself, read the instructions contained in this instruction
manual and follow those instructions;
● everyone is regularly instructed on relevant matters.
The owner must ensure a safe environment by providing:
● this instruction manual with this product;
● adequate lighting in all areas where activities in connection with this product
are performed. A minimum of 200 lux is required to ensure visibility of the
equipment, the controls and the safety labels;
● all required personal safety gear such as hearing, eye, feet protection, etc.
in all areas where activities in connection with this product are performed;
● supervision for inexperienced personnel working or performing activities in
connection with this product;
● the tools listed in this manual to perform activities in connection with this
product;
● an adequate installation of the product in order to use it only for the sole
purpose for which it was designed;
● new parts to replace any defective, worn or damaged parts on this product;
● appropriate devices such as motor, engine, hydraulic unit, etc. to safely
operate this product. To meet the technical requirements, refer to section
Technical data;
● a product meeting the local rules and regulations.
