!
!
!
Maintenance
Check bottom translucent hose of suspension cylinders
2018-9015-003
03-2015
10.12
Check hydraulic suspension
Before each use or every 10 hours, whichever comes first
● Park the spreader on a flat and level
surface;
● Measure the length of the
suspension rod (X), the dimension
must be 15 cm;
● If length is not appropriate, refer to
section Advanced maintenance -
Hydraulic suspension.
Note!
The tire is removed for better understanding.
10.13
Check bottom translucent hose of suspension cylinders
Before each use or every 10 hours, whichever comes first
Note!
This section concerns a standard suspension with oil on the upper side
of pistons. It is not applicable for the optional suspension cylinder with
oil on both sides of piston.
Use hydraulic oil. Refer to section Technical data - Lubricant
specifications.
● Remove the hose (1) from the frame.
● Add hydraulic oil in the hose until it is
covered with oil (2), as indicated.
● Insert the hose in the frame.
● Repeat all these steps for each
suspension cylinder.
1
2
