Operating
Operating spreader options
2018-9015-003
03-2015
8.9
Operating spreader options
8.9.1
Self-loading
Attention!
Never open cleaning openings and drains when the spreader tank
contains liquid.
Attention!
Always keep this product on a flat and level surface.
Note!
Make sure the loading pipe is properly aligned with the fill opening.
Note!
Before loading the spreader, make sure that manure is homogenized
and that the consistency matches the tool bar capacity. Refer to
section Appendix - Consistency test.
Note!
Refer to the PTO driveline instruction manual and follow
manufacturer's recommendations.
● Apply the tractor parking brake and turn off the engine.
● Remove suction hose and pipe from supports located on each side of the
spreader.
● Assemble the hoses and pipes together.
● Close the gate valve (1) by pushing
the gate valve lever (2) downward.
● Open ball valve (3).
● Unlock the latch mechanism by
flipping the locking flat bar (4).
3
4
1
2
● Insert the suction hose adaptor (5) in
the U-shape support (6).
● Pull the receptacle lever (7) to
connect the hose adaptor (5) to the
receptacle (8).
● Make sure the O-ring (9) properly
seals the connection.
7
8
6
5
9