Chapter 4 Software Index
4-32
Parameter Group 5-Multifunction Input Terminals (MFIT)
Multifunction input terminals (TM2 S1-S6/AIN) controlling
：
：
：
：
5-00~06
0000: Forward/Stop Command *
1
0001: Reverse/Stop Command *
2
0002: Preset Speed # 1 (6-02)
0003: Preset Speed # 2 (6-03)
0004: Preset Speed # 3 (6-05) *
3
0005: Jog
0006: Acc/Dec time # 2
0007: Emergency Stop
Contact A
0008: Base Block
0009: Speed Search Stop
0010: Energy Saving
0011: Control Signal Selection
0012: Communication Control Signal Selection
0013: Acc/Dec Disabled
0014: Up Command
0015: Down Command
0016: Principal/Auxiliary Speed
0017: PID Function Disabled
0018: Reset
0019: Encoder Input Terminal
（
（
（
（
Terminal S5
）
）
）
）
0020: PID Feedback Signal A12
（
（
（
（
Terminal S6
）
）
）
）
0021: AI2 Bias Signal 1 Input
（
（
（
（
Terminal S6
）
）
）
）
0022: AI2 Bias Signal 2 Input
（
（
（
（
Terminal S6
）
）
）
）
0023: Analog Input
（
（
（
（
Terminal AIN
）
）
）
）
0024: PLC Application
0025: Traverse Run
0026: Traverse Run Upper Deviation
0027: Traverse Run Lower Deviation
0028: Power Source Detect for KEB Function
0029: Emergency Stop
Contact B
A. The terminals S1-AIN on terminal block (TM2) are multifunction input terminals. The above 30
functions can be set in these terminals.
B. Function Description for 5-00~06:
1.
5-00~06=0/1(Forward/Reverse/Stop)
As forward command is ON, the inverter runs while stops as OFF. The 5-00 factory set is
forward.
As reverse command is ON, the inverter runs while stops as OFF. The 5-01factory set is
reverse.
2.
5-00~06=2-4(Preset speed 1~3)
External multifunction input terminals are ON, the inverter is operation at the preset time, and
the duration is determined by the time of the terminal ON. The corresponding frequency
parameter is illustrated below:
