![background image](http://html.mh-extra.com/html/ge/ur-series/ur-series_instruction-manual_131898097.webp)
GE Multilin
L60 Line Phase Comparison System
3-43
3 HARDWARE
3.4 MANAGED ETHERNET SWITCH MODULES
3
3.4.3 MANAGED SWITCH LED INDICATORS
The 10/100Base-T and 100Base-FX ports have LED indicators to indicate the port status.
The 10/100Base-T ports have three LEDs to indicate connection speed, duplex mode, and link activity. The 100Base-FX
ports have one LED to indicate linkup and activity.
Figure 3–48: ETHERNET SWITCH LED INDICATORS
3.4.4 CONFIGURING THE MANAGED ETHERNET SWITCH MODULE
A suitable IP/gateway and subnet mask must be assigned to both the switch and the UR relay for correct operation. The
Switch has been shipped with a default IP address of 192.168.1.2 and a subnet mask of 255.255.255.0. Consult your net-
work administrator to determine if the default IP address, subnet mask or default gateway needs to be modified.
Do not connect to network while configuring the switch module.
a) CONFIGURING THE SWITCH MODULE IP SETTINGS
In our example configuration of both the Switch’s IP address and subnet mask must be changed to 3.94.247.229 and
255.255.252.0 respectively. The IP address, subnet mask and default gateway can be configured using either EnerVista
UR Setup software, the Switch’s Secure Web Management (SWM), or through the console port using CLI.
1.
Select the
Settings > Product Setup > Communications > Ethernet Switch > Configure IP
menu item to open the
Ethernet switch configuration window.
842868A2.CDR
Connection speed indicator (OFF = 10 Mbps; ON = 100 Mbps)
Link indicator (ON = link active; FLASHING = activity)
Duplex mode indicator (OFF = half-duplex; ON = full-duplex)
Link indicator (ON = link active; FLASHING = activity)
CAUTION
Summary of Contents for UR series
