4. Conventional Operation: Menu System, Keypad, and Displays
PHASOR XS Operating Manual
Page 51
GATE B Submenu
(Refer to
Section 5.1.1
)
•
GATE B START
—Sets the beginning position of B gate on the
A-Scan.
•
GATE B WIDTH
—Sets the width of B gate on the A-Scan.
•
B THRESHOLD
—Sets the height of B gate.
•
TOF MODE
—Indicates whether an A-Scan echo’s flank, or peak is
evaluated by the B gate. (Refer to
Section 5.1.2
)
GATEMODE Submenu
•
A GATE LOGIC
—Determines whether the gate alarm is triggered
when a signal crosses the gate or does not cross the A gate. (Refer to
Section 5.1.3
)
•
B GATE LOGIC
—Determines whether the gate alarm is triggered
when a signal crosses the gate or does not cross the B gate. (Refer to
Section 5.1.3
)
•
OUTPUT SELECT
—Set alarm light and output to indicate when one
or both gates are triggered (Refer to
Section 5.1.3
)
EVAL Menu
TRIG Submenu
(Refer to
Section 5.2
)
•
PROBE ANGLE
—Input the angle of a connected angle beam probe.
•
THICKNESS
—Sets the test-piece material thickness for angle-beam
measurements.
•
X VALUE
—Input the specified value from the angle beam probe’s
BIP to front edge.
•
COLOR LEG
—Indicates in which leg a reflector is located. (Used
with angle beam probes.)
RESULTS Submenu
(Refer to
Section 5.3
)
•
READING 1 THROUGH READING 4
—Selects the measurement
displayed in each of the four Reading Boxes. (Refer to
Section 5.3
)
RESULTS2 Submenu
(Refer to
Section 5.3
)
•
MODE
—Set the large reading box to display one or two results
•
READING 5 / LRG
—Select the measurement displayed in the large
or fifth (if the large box is split) result box.
•
READING 6
—Select the measurement displayed in the sixth (when
the large box is split) result box.
GATE A Submenu
(Refer to
Section 5.1.1
)
•
GATE A START
—Sets the beginning position of A-Gate on the A-
Scan.
•
GATE A WIDTH
—Sets the width of A-Gate on the A-Scan.
•
A THRESHOLD
—Sets the height of A gate on the A-Scan.
•
TOF MODE
—Indicates whether an A-Scan echo’s flank or peak is
evaluated by the A gate.
GATE B Submenu
(Refer to
Section 5.1.1
)
•
GATE B START
—Sets the beginning position of B-Gate on the A-
Scan.
•
GATE B WIDTH
—Sets the width of B-Gate on the A-Scan.
•
B THRESHOLD
—Sets the height of B gate on the A-Scan.
•
TOF MODE
—Indicates whether an A-Scan echo’s flank or peak is
evaluated by the B gate.
FILES Menu
FILENAME Submenu
(Refer to
Sections 6.1
and
6.6
)
•
FILENAME
—Select stored files or input new data set or report
name.
•
SOURCE/DEST
—Indicates the device to or from which data is sent.
•
ACTION
—Recalls or deletes the selected file and saves edits to
data sets and reports.
•
ENTER
— Causes specified ACTION to occur.
FIGURE 4-4—The instrument’s various evaluation menu selections are activated via the EVAL MODE function located in
the EVAL Menu. Once selected, the active evaluation mode is added to the HOME Menu.
Summary of Contents for Phasor 16/16
