GE Phasor 16/16 Operating Manual Download Page 57

Page: 57 / 116

4. Conventional Operation: Menu System, Keypad, and Displays

PHASOR XS Operating Manual

Page 55

Step 2:

Press

next to the selection titled LAN-

GUAGE. To change the selected language, continue
pressing

or turn the function knob. You’ll note that

the options available are English, German, French,
Spanish, Italian, Romanian, Polish, Czech, Rus-
sian, Japanese and Chinese. The default language is
English.

Step 3:

The display-screen and report language will be

set to the choice last selected.

Setting the Date and Time Formats (CONFIG-
REGIONAL-DATE FORMAT)

Step 1:

Activate the REGIONAL submenu (located in the

CONFIG Menu) by pressing

below it.

Step 2:

Press

next to the selection titled DATE FOR-

MAT. To change the selected format, continue pressing

or turn the function knob. Choose from the following

date and time formats:

Y-M-D

(12 or 24 hour time format)

M/D/Y

(12 or 24 hour time format)

D.M.Y

(12 or 24 hour time format)

Step 3:

The date and time formats shown on the display-

screen and in outputted reports will be set to the choice
last selected.

Setting the Date (CONFIG-STARTUP-DATE)

Step 1:

Activate the STARTUP Submenu (located in the

CONFIG Menu) by pressing

below it. Functions will

appear down the left side of the display screen.

Step 2:

Press

next to the selection titled DATE. The

date is displayed to show the Day, Month, and Year. Note
that the ﬁrst time you press

, the day character is

highlighted. The next time you press

, the month

character is highlighted. Finally, pressing

again

will cause the year character to be highlighted.

Step 3:

To change the month, days, or year, turn the func-

tion knob while the desired character is highlighted.

Step 4:

When complete, press

one more time. The

current date will be set to the date displayed.

Setting the Time (CONFIG-STARTUP-TIME)

Step 1:

Activate the STARTUP Submenu (located in the

CONFIG Menu) by pressing

below it. Functions will

appear down the left side of the display screen.

Step 2:

Press

next to the selection titled TIME. Time is

displayed in 12 or 24-hour format. Note that the ﬁrst time
you press

, the hours character is highlighted. The next

time you press

, the minutes character is highlighted.

Step 3:

To change the hours or minutes setting, turn the

function knob while the desired character is highlighted.

FIGURE 4-7—The CONFIG Menu allows the user to adjust most of the instrument’s display and operating features. The

SETUP Menu allows for pulser, receiver, and A-Scan adjustments.

Summary of Contents for Phasor 16/16





















































































































Search results

Summary of Contents for Phasor 16/16

Reviews:

Related manuals for Phasor 16/16

Brands by name

Popular brands

GE Phasor 16/16, Operating Manual

Search results

Summary of Contents for Phasor 16/16

Reviews:

Related manuals for Phasor 16/16

Brands by name

Popular brands