4–12
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
ML810 SWITCH PORT MODULES
CHAPTER 4: OPERATION
4.5.11 ML810 (C6), ML810 (C8) (Slot C)
2 x SC Multimode or 2 x ST Multimode / 2 x RJ45
The ML810 (C6) (shown), 4-port Fiber/Copper module provides two 100Mb Multimode SC
Fiber ports and two 10/100Mb switched RJ45 ports. This option utilizes a SC-type “push-
pull” fiber optic connection.
The ML810 (C8), 4-port Fiber/Copper module provides two 100Mb Multimode ST Fiber ports
and two 10/100Mb switched RJ45 ports. This option utilizes a ST-type “twist-lock” fiber
optic connection.
The ML810 (C6, C8) copper ports support Ethernet twisted pair segments of any standard
length. It is equipped with a two-port RJ-45 connector, and offers 10/100 full / half-duplex
auto-negotiating capability on each port. The RJ-45 connector is shielded to minimize
emissions and will allow both unshielded twisted pair (UTP) and shielded twisted pair (STP)
cable connections. When installed in a Multilink ML810 Series Managed Switch, the copper
ports support the standard distance of 100m on each port.
(See Sections 5.1.2 and 5.1.9 for more details.)
4.5.12 ML810 (C7) (Slot C)
2 x SC Singlemode / 2 x RJ45
The ML810 (C7), 4-port Fiber/Copper module provides two 100Mb Singlemode SC Fiber
ports and two 10/100Mb switched RJ45 ports. This module provides the same functions as
the Multimode version. (See Section 5.1.11 for more details.)
4.5.13 ML810 (EJ), ML810 (EH) (Slot C)
The ML810 (EJ), 4-port Fiber module provides two 100Mb Singlemode LC Fiber ports and
two 100Mb Multimode LC Fiber ports.
The ML810 (EH), 4-port Fiber module provides one 100Mb Singlemode LC Fiber port and
three 100Mb Multimode LC Fiber ports.
