manualshive.com logo in svg

GE MultiLink ML810, Instruction Manual

The GE MultiLink ML810, a versatile and high-performance device, comes with a comprehensive Instruction Manual that allows users to harness its full potential. Download this manual for free from manualshive.com, to easily navigate through its features, ensuring a seamless and enjoyable experience with your ML810.

Share
Download
background image

CHAPTER 1: SPECIFICATIONS

FIRMWARE OVERVIEW

MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL

1–7

Before you start, it is recommended to acquire the hardware listed below and be ready 
with the items listed.
For initial configuration through the serial/console port:

1.

A female-female null modem cable.

2.

A serial port. If your PC does not have a serial port, you may want to invest in 
a USB-to-serial converter or USB-to-serial cable.

3.

Terminal emulation firmware such as HyperTerminal or other equivalent 
firmware. Ensure the firmware supports Xmodem protocol, as you may need 
this in the future to update the MultiLink Switch Software.

4.

Enough disk space to store and retrieve the configuration files as well as copy 
firmware files. We recommend at least 15 MB of disk space for this purpose.

5.

For access security - decide on a manager level account name and password 

6.

IP address, netmask, default gateway for the switch being configured.

As a default, the switch has no IP (Internet Protocol) address and subnet mask. For first 
time use, the IP address has to be assigned. This can only be done by using the console 
interface provided.
The same procedure can also be used for other configuration changes or updates (for 
example, changing the IP address, VLAN assignments and more). Once the IP address is 
assigned and a PC is networked to the switch, the switch's command line interface (CLI) 
can be accessed via telnet. To manage the switch through in-band (networked) access 
(e.g. telnet, or web browser Interface), you should configure the switch with an IP address 
and subnet mask compatible with your network. Also, change the manager password to 
control access privileges from the console.
Many other features such as optimizing the switch's performance, traffic engineering and 
traffic prioritizing, VLAN configuration, and improving network security can be configured 
through the switch's console interface as well as in-band (networked) access, once the IP 
address is setup. Besides the IP address, setting up the SNMP parameters allows 
configuration and monitoring through an SNMP network management station running a 
network management program.

Summary of Contents for MultiLink ML810





























































































































































































































































































































































Reviews:

No comments

Related manuals for MultiLink ML810

GE GuardSwitch 300 Series Quick Start Manual preview
GuardSwitch 300 Series
Brand: GE Pages: 4
Cabletron Systems SmartCell 6A000 User Manual preview
SmartCell 6A000
Brand: Cabletron Systems Pages: 114
Cabletron Systems MRX Installation Manual preview
MRX
Brand: Cabletron Systems Pages: 62
Cabletron Systems CyberSWITCH CSX150 Quick Start Manual preview
CyberSWITCH CSX150
Brand: Cabletron Systems Pages: 49
Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual preview
Cabletron CyberSWITCH CSX5500
Brand: Cabletron Systems Pages: 729
Attwood 4204 Installation Instructions preview
4204
Brand: Attwood Pages: 2
Black Box CATx Technical Specifications preview
CATx
Brand: Black Box Pages: 4
E-LINK LNK-IMC208P-SFP Quick Start Manual preview
LNK-IMC208P-SFP
Brand: E-LINK Pages: 6
Clever Little Box Wi-View 300V User Manual preview
Wi-View 300V
Brand: Clever Little Box Pages: 15
Tripp Lite B155-002-DP-V2 Owner'S Manual preview
B155-002-DP-V2
Brand: Tripp Lite Pages: 12
Barox PC-IA100 Series User Manual preview
PC-IA100 Series
Brand: Barox Pages: 7
ALFAtron ALF-MUH88TP-N Manual preview
ALF-MUH88TP-N
Brand: ALFAtron Pages: 68
Accton Technology EtherHub-16 Quick Start Manual preview
EtherHub-16
Brand: Accton Technology Pages: 10
Lancom GS-3528X Installation Manual preview
GS-3528X
Brand: Lancom Pages: 23
G-Lab GSC-3 User Manual preview
GSC-3
Brand: G-Lab Pages: 12
Delta Electronics AGC764V1 Installation Manual preview
AGC764V1
Brand: Delta Electronics Pages: 31
Linkskey LKU -UA02 Quick Installation Manual preview
LKU -UA02
Brand: Linkskey Pages: 2
TRENDnet TK-407K - KVM Switch - USB Specifications preview
TK-407K - KVM Switch - USB
Brand: TRENDnet Pages: 2

Brands by name

Popular brands

Load more brands