GE MobileView 4, Installation Manual

Page: 89 / 106

Chapter 6
Testing
79
battery state. Observing this input will help determine why the system shuts down in over/
under voltage conditions.
System temperature is also shown in this screen ( Figure 60 on page 77). This screen shows
what external or internal factors create overheating conditions. Click the X (at top right of
screen) to exit.
Relay testing
Each relay activates and deactivates in succession when you click the Enable Relay Testing
checkbox.
Fan and fuse status
The DVR front status LEDs provide summary of fan and power conditions. The real-time
input screen shows detail on each fan and fuse.
Status indicators
The DVR has 10 digital inputs. The circle shown on the right side of the real-time input
screen (
Figure 60 on page 77) indicates the status of each input. All inputs use a black circle
to indicate the off state. The on state is shown by red and green circles.
In the Alarm events configuration screen, an input on state equates to Activated while input
off state equates to Deactivated .
Log off DVR
Once you complete the review and testing of your DVR’s main features, do the following:
1. Close the Real-time inputs screen.
2. Close the MV4 Monitor program.
3. Restart the DVSS server.
4. Log off the remote desktop session.