GE MobileView 4 Installation Manual Download

Page: 21 / 106

Chapter 2

Camera installation

Camera assemblies

The MobileView system supports up to twelve cameras (color and monochrome). Cameras
supported by the MobileView system provide a 1.0 Vp-p composite analog video signal, at
75 ohm (CCTV standard).

Note:

In some installations, it is necessary to use a metal tapping plate behind the mounting surface. If you

are using a tapping plate, prepare it the same way as the mounting surface. Drill a cable entry hole and
mounting holes in the appropriate locations.

Surface-mount

It is typical to install surface-mount camera housings on the ceiling, but you may also mount
the housings to any flat vehicle surface.

1. Use the template in

Camera mounting plate template

on page 93 to mark the

location of the cable-entry hole and two mounting holes (

Figure 4

Figure 4. Mounting hole locations

2. Using a 3/16 in. (5 mm) drill bit, drill the two mounting holes.

3. Using a 1 in. (25 mm) drill bit, drill the cable entry hole.

4. Install a 3/4 in. (20 mm) (interior diameter) grommet on the cable entry hole, or

where feasible.

Cable entry hole

Mounting hole

Mounting hole slot

Summary of Contents for MobileView 4











































































































Search results

Summary of Contents for MobileView 4

Reviews:

Related manuals for MobileView 4

Brands by name

Popular brands

GE MobileView 4, Installation Manual

Search results

Summary of Contents for MobileView 4

Reviews:

Related manuals for MobileView 4

Brands by name

Popular brands