GE MM3, Instruction Manual, Page: 74 / 230

4–12 MM3 MOTOR MANAGER 3 – INSTRUCTION MANUAL
USING ENERVISTA MM3 SETUP CHAPTER 4: SOFTWARE
Figure 4-12: Entering Numerical Setpoints
Z
For setpoints requiring a non-numeric value (in the example above,
overload curve number), click anywhere inside the setpoint box to
open a drop-down menu.
An appropriate setpoint may then be selected.
Z After setpoint modifications are complete, click OK to save the
values into the local PC memory, Cancel to return to the previous
values, or
Store to send the values to the MM3 Motor Manager 3 (if
connected).
Z Click on Help to display help topics related to the setpoints being
modified.
4.3.5 Viewing Actual
Values
The following example shows how to view and trend MM3 Motor Manager 3 actual values.
Z Establish communications with the MM3 Motor Manager 3 unit and
select the
Actual > Statistics menu item.
This opens the window showing the relevant monitored values.
These values are continuously updated while the window is open.
Enter the new value by clicking on the numerical keys.
Click to exit the keypad and keep the new value. Accept
Click to exit the keypad and keep the old value
Cancel
809703A1.CDR