GE MDS entraNET 2400, Technical Manual

Page: 48 / 220

38 MDS entraNET Technical Manual 05-4055A01, Rev. E
NOTE:
If the radio is powered up or restarted while connected to a
terminal, a series of pages of text relating to the startup of the
internal microcomputer is displayed. Wait for the log-in screen
before proceeding.
4. Press to receive the
login
prompt.
5. Enter the username (the default username is
admin
). Press .
6. Enter your password (the default password is
admin
). For security,
your password keystrokes do not appear on the screen. Press .
NOTE: Passwords are case sensitive. Do not use punctuation marks.
You may use up to eight alphanumeric characters.
The Starting Information Screen is displayed ( Figure 3-7 ). From
here, you can review basic information about the radio, or press
G
to
proceed to the Main Menu .
Invisible place holder
Figure 3-7. Starting Information Screen—Local Console Session
Starting a Telnet
Session
NOTE:
This method requires that you know the IP address of the radio
beforehand. If you do not know the address, use the Local
Console method (above) and access the
Starting Information
Screen . The address is displayed on this screen.
1. Connect a PC to the
LAN
port on the radio, either directly or over a
network. If connecting directly, use an Ethernet crossover cable; if
connecting over a network, use a straight-through cable. The
LAN
LED lights to indicate an active connection.
ENTER
ENTER
ENTER