GE MDS entraNET 2400, Technical Manual

Page: 119 / 220

05-4055A01, Rev. E MDS entraNET Technical Manual 109
LOCATION
—Sets or displays the radio location (1-40 ASCII characters).
UPTIME
—( read only ) Displays the current system uptime in the format
<YY-MM-DD hh:mm:ss>
.
SER
—Device serial number.
DIRECT Sets or displays the configuration for direct-mode operation
(Remote-to-Remote). This is a special mode intended primarily for
railroad applications where Remotes communicate with each other.
Optional arguments:
CMD
—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
CWMIN=<range integer>
—In
ROOT
mode, this command sets the
Minimum Contention Windows size (
<CWMAX+1
).
0
: Min=0
15
: Max=15
CWMAX=<range integer>
—In
ROOT
mode, this command sets the
Maximum Contention Windows (
>CWMIN-1
).
0
: Min=0
15
: Max=15
DEFAULT=<mode>
—Sets or displays the default power-up state direct
mode.
ON
: Default direct state is Direct Mode.
OFF
: Default direct state is Infrastructure Mode.
EXT
: Default direct state is controlled by an external I/O pin.
FEC=<ON|OFF>
—In
ROOT
mode, this command sets the Forward Error
Correction setting.
ON
: FEC on
OFF
: FEC off
HOPTIME=<ms>—
In
ROOT
mode, this command sets the time between
frequency hops:
7
: 7 ms
14
: 14 ms
28
: 28 ms
MODE=<mode>
—Sets operation to Direct or Infrastructure mode.
ON
: Enter Direct mode
OFF
: Enter Infrastructure mode
EXT
: Enter Direct mode by external control