GE MDS entraNET 2400, Technical Manual

Page: 112 / 220

102 MDS entraNET Technical Manual 05-4055A01, Rev. E
2. At the
username
prompt, enter your username (
admin
is the default).
3. At the
Password
prompt, enter your password (
admin
is the default).
4.4 Commands
Table 4-1 on Page 103 provides a quick reference to the various
commands for the Remote transceiver. Detailed descriptions for these
commands follow in
Section 4.5.1 .
4.4.1 Entering Remote Commands
To enter a command:
• Type the command (including any spaces), and then press
.
To request or set a value:
• Type the command, press
=
, and then press .
For example:
• Type
COMMAND_ARGUMENT=
to query a setting or value.
• Type
COMMAND_ARGUMENT=VALUE
to set values.
To get help with a command:
• Type the command, press , press
?
, and then press .
4.5 Minimum Configuration for Remotes
Remote radios require little configuration to operate, as most of the
configuration is conducted at the AP. The minimum set of parameters
that needs to be set for a Remote are:
RADIO UNIT
—32-bit radio address. Defaults to the radio serial
number, but is settable.
RADIO NETADDR
—Radio network address. Must match the AP
address.
RADIO PWR
—RF output power setting in decibels (dB). The
range is 20-30 for non-ETSI 900 MHz radios, 20-27 for
non-ETSI 2400 MHz radios, and 10-20 for ETSI 2400 MHz
radios.
ENTER
ENTER
SPACE ENTER