GE LOGIQ 7, Service Manual

Page: 238 / 394

GE H
EALTHCARE
D
IRECTION
2286865, R
EVISION
14 LOGIQ™ 7 S
ERVICE
M
ANUAL
8-32 Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10 System Settings
After application is successfully installed, various LOGIQ™ 7 system parameters must be properly set.
Table 8-7 System Settings
Item Method Proper Value
Software Version Utility
\ System
\ About
s/w version : R8.x.x
Image Part No. :
5305206-3
Regional Preset Utility
\ System
\ About
\ Additional About Information For the system other than “NONE”
selected as Regional Preset, resetting
MUST be required.
Computer Name Utility
\ Connectivity
\ TCP/IP
\ Computer Name
\ Enable DHCP
\ IP Address
\ Subnet Mask
\ Default Gateway
Same as Serial Number
OFF
restore customer setting
restore customer setting
restore customer setting
Patient
Database Check Utility
\ Connectivity
\ DataFlow
\ Default Data Flow
Press Patient (Keyboard or Touch Panel)
Local Archive – Int. HD
(n/a – Automatic)
LCD Monitor Setting Press ‘Toggle Button’ for few seconds (various)
Software Option Utility
\ Admin
\ System Admin
\ HW Number
Same as Option Dongle ID
VCR Utility
\ Peripherals
\ Video Setting
\ VCR
PAL/NTSC-depends on region
(set accordingly)
Language pre-work (For
Japanese Only) Utility
\ Regional Option
\ Language (tab)
\ Install Files to East Asian Language
(Reboot)
ON / Apply