GE LOGIQ 7, Service Manual

Page: 187 / 394

GE H
EALTHCARE
D
IRECTION
2286865, R
EVISION
14 LOGIQ™ 7 S
ERVICE
M
ANUAL
Section 6-5 - Monitor and LCD Adjustments 6-25
6-5-5-2 For Technart (cont’d)
b.) Check the upper, lower, left, and right edge of the screen. They should be centered evenly in
the monitor.
- If they are vertically out of alignment, adjust VPosition.
- If they are horizontally out of alignment, adjust HPosition.
c.) Display the LCD monitor menu and press the MENU button once. The following menu appears.
d.) Repeat to press the MENU button until the “HPosition” or “VPosition” blinks.
e.) Repeat to press the PLUS or MINUS button until the screen should be centered evenly in the
monitor.
f.) Press the AUTO button once to save the setting.
g.) Repeat to press the MENU button until the “Exit” blinks
h.) Press the AUTO button once to exit from the menu.
6.) Go to 6-5-5-2-3 Completing adjustment .
Figure 6-33 H Position or V Position