GE M
EDICAL
S
YSTEMS
D
IRECTION
FK091075, R
EVISION
04
V
IVID
3N P
RO
/E
XPERT
S
ERVICE
M
ANUAL
Chapter 8 Replacement Procedures
8-59
8-5-1-4 Back End Processor Installation Procedure
(cont’d)
6.) Connect the keyboard cable to the keyboard socket [
5
].
7.) Connect the cable to the COM 1 socket [
6
].
8.) Connect the cable to the HASP and Parallel OUT socket [
7
].
9.) If available on the system, connect the USB cable to the USB socket [
8
].
10.) If available on the system, connect the Network cable to the Network socket [
9
].
11.) Connect the Back End Audio BKT EXT cable to the Audio IN/OUT socket [
10b
].
12.) Connect the Back End Audio BKT EXT cable to the Audio IN/OUT socket [
10a
].
13.) Connect the PC2IP cable to the PC2IP IN/OUT socket [
11
].
14.) If available on the system, connect the modem communication cable to the COM 3 and 4 socket
[
12
].
15.) Connect the Back End KB Cont P1 cable to the Ext Keyboard socket [
13b
].
16.) Connect the Back End KB Cont P2 cable to the Ext Keyboard socket [
13a
].
17.) Connect the VIC/ Rear Panel left connector cable to the RGB Video OUT
socket [
14
].
18.) Connect the Keyboard/VIC External power cable to the power to Keyboard Matrix socket [
15
].
Note:
IMPORTANT -
Do NOT connect the HASP key to this socket!
- refer to
step 8
above
[connection to socket
7
].
Figure 8-55 Cable Connections on BEP2 Rear Panel
X
COM1
X
HASP and Parallel OUT
USB
Network
Audio IN/OUT
PC2IP IN/OUT
Ext. Keyboard
COM3 & 4 for Modem
(only if option installed)
VGA OUT (to Monitor)
Power to Keyboard Matrix
RGB Video OUT
Plug & Scan, optional
BEP Power
1
3
4
2
6
5
7
8
9
12
11
10a
10b
VIC VGA OUT
VIC VGA IN
Trackball
Keyboard
Do not use
Do not use
Audio IN/OUT
13a 13b
16b
16a
14
15
