GE DVSR xU, User Manual

Page: 82 / 104

78 DVSR xU User Manual
Configuring the user settings
The following procedure shows how to manage users. The options can be changed in any order.
In the main menu, go to the User menu icon and press Enter or left-click the mouse. The User menu
appears.
To save changes made in the menu
1. When you have made all the changes required in the Users menu, go to OK and press Enter or
left-click the mouse to save all the changes. To abort the changes, select Cancel and press Enter.
You will then return to the main menu.
Note: Selecting OK in submenus confirms but does not save the changes made. Changes are only saved
when OK is selected in the Users menu.
To modify a user’s PIN
PINs are used to limit access to the DVSR xU. Only the administrator can create or delete a PIN.
The same PIN can be used by several users. When you create a new user, the default PIN is 0000.
Caution: When you have completed the installation of the DVSR xU you must change the
Administrator PIN. Only authorized users should be able to modify menu settings.
1. In the User menu select the user whose PIN you want to change. The user name is highlighted.
Note: When a user’s name is highlighted the PIN and Verify boxes display ********. If there are no symbols
displayed in these boxes, the selected user does not have a PIN.
2. Go to the Set PIN edit box.
3. Using the number buttons, enter the new PIN. A PIN can have up to 16 numbers. When finished,
press Enter or left-click the mouse to exit edit mode.
4. Go to the Confirm edit box and re-enter the new PIN. When finished, press Enter or left-click the
mouse to exit edit mode.
If the two PINs entered are identical, the PIN is saved and becomes effective immediately.
However, if they are different a warning message appears. Press Enter to confirm. You will return
to the PIN edit box and must re-enter the new PIN again.
5. Go to OK and press Enter or left-click the mouse to accept the save and return to the main menu.
To add a new user
Only the system administrator can add or delete users.
1. In the User menu go to the Add User button and press Enter or left-click the mouse. The Add pop-
up dialog box appears (see Figure 54). The cursor is in the User Name entry box.