GE DVSR xU, User Manual

Page: 44 / 104

40 DVSR xU User Manual
Figure 30: Positioning date/time bar
6. Using the arrow buttons move the date/time bar around the screen. When you are satisfied with
the position press Enter, or right-click the mouse and select OK, to return to the Camera menu.
To setup the DVSR xU to respond to a motion detection alarm
The DVSR can be setup to trigger an alarm if a camera detects motion. You can select the level of
sensitivity to motion, where on screen the motion can be detected, and specify which cameras can
record the motion when a motion alarm is detected.
1. To set the motion detection sensitivity level
In the Camera menu go to Motion Detection list box and select the desired motion detection
sensitivity level required.
There are seven levels to choose from: 0 (lowest) to 6 (highest) as well as “Off”. If “Off” is selected,
the unit will not respond to any motion detection. If 0 to 6 is selected, motion detection Zone and
Rules setup buttons become active. Press Enter or left-click the mouse to confirm the change.