GE DVSR xU, User Manual

Page: 41 / 104

DVSR xU User Manual 37
Configuring camera settings
The following procedures show how to change camera settings from the Camera menu. They can be
changed in any order.
In the main menu, go to the Camera menu icon and press Enter or left-click the mouse. The Camera
menu appears.
All changes made to the Camera menu apply to the selected camera. The camera settings of one
camera can easily be copied to another camera.
To save changes made in the menu
1. When you have made all the changes required in the Camera menu, go to OK and press Enter or
left-click the mouse to save all the changes. To abort the changes, select Cancel and press Enter.
You will then return to the main menu.
Note: Selecting OK in submenus confirms but does not save the changes made. Changes are only saved
when OK is selected in the Camera menu.
To setup the camera title
Each camera can be given a title, which must be unique. If you do not give a camera a title, it is
automatically pre-numbered.
1. In the Camera menu go to the Camera list box and press Enter or left-click the mouse. Select the
number of the camera you want to name.
2. Go to the Title setup box and press the EDIT button or left-click the mouse to enter into edit mode.
3. Enter the camera title. You can use numbers, uppercase and lowercase letters, and some special
characters such as commas and colons. The camera title can have up to 32 alphanumeric
characters.
Front panel and
remote control Press button A and then an alphanumeric button to change the
character input type. Press the A button 1 to 4 times to scroll through the
type of characters available for an alphanumeric button.
Mouse An onscreen display appears showing the alphanumeric keys. Click Shift
to select which type of character you want (for example, uppercase or a
special character such as comma and colon).
4. Press Enter or left-click the mouse to confirm your change.
To position the camera title on screen
You can position the camera title anywhere on screen.
1. In the Camera menu enable the Title Position check box (

) if you want the camera title to appear
on screen. When enabled, the Position setup button alongside it becomes active.
2. Go to the Position setup button and press the EDIT button or left-click the mouse to enter into edit
mode. A grid appears onscreen with the camera title in the bottom right corner.
3. Using the arrow buttons, move the camera title around the screen. When you are satisfied with
the position, press Enter or left-click the mouse to confirm and return to the Camera menu.